55161 | MVK-MPNIO DIO14 DIO2/IOL2 M12L 4P - фото 1 - id-p96351796

Характеристики и описание

Input
Sensor supply US	24 V DC (EN 61131-2), max. 200 mA (M12 female), short-circuit and overload protected
Type	for 3-wire sensors or mechanical switches, PNP, IO-Link Devices
Connections
Fieldbus	Ethernet 10/100 Mbit/s{} M12, D-coded
Sensor-system/actuator supply	M12 Power, 4-pole, L-coded, 2 ? max. 16 A
I/O ports	M12, 5-pole, A-coded
General data
Protection	IP67
Mounting method	2-hole screw mounting
Dimensions H ? W ? D	42?63?225 mm
Temperature range	-25...+60 °C (storage temperature -25...+70 °C)
PROFINET
FSU (Fast-Start-Up)	max. 500 ms
Shared Device/Input	yes, for 2 controls
PROFINET Netload Class	III
Specification	V2.3, Conformance Class C (IRT)
MRP	yes
Addressing	DCP
IO-Link
IO-Link	2 ? Master
Operating modes	COM1{} COM2{} COM3 (automatic)
Transfer parameters	32 Byte (via IO-Link Port)
Port Class	Class B (not galvanically separated)
Specification	IO-Link Master V1.12
Output
Actuator supply UA	24 V DC (EN 61131-2), max. 9 A
Switching current per output	max. 1.6 A (short-circuit and overload protected)
Lamp load	10 W
Parameterization
PIN 4	Input/Output (port X0...X7){} IO-Link Master (port X6, X7)
PIN 2	Input/Output (port X0...X7){} U-Actuator IO-Link Class B (port X6, X7)
Diagnostic
Communication status	via LED
Diagnostic via LED	per module and channel
Diagnostic via BUS	per module and channel
Monitoring - under voltage	yes
Monitoring - no voltage	yes
Short-circuit and overload	yes
Actuator warning	per channel via LED and BUS
Cable break	per port
Commercial data
country of origin	DE
customs tariff number	85389099
EAN	4048879735797
Packaging unit	1