Характеристики и описание
Описание оборудования | |
|---|---|
| Cabinet module 4 inputs and 4 relay outputs | |
General specifications | |
| Slave type | Standard slave |
| AS-Interface specification | V3.0 |
| Required master specification | ? V2.0 |
| UL File Number | E223772 |
| MTBF | 224 a |
Indicators/operating means | |
| LED FAULT | Fault display; Red LED red: Communication fault or address is 0 red, flashing: Overload, internal input supply |
| LED INT | Internal input supply active; LED green |
| LED PWR | AS-Interface voltage; green LED green: voltage OK flashing green: address 0 |
| LED IN | switching state (input); 4 LED yellow |
| LED OUT | Switching state (output); 4 LED yellow |
Electrical specifications | |
| Auxiliary voltage (input) | 12 ... 30 V DC PELV |
| Rated operating voltage | 26.5 ... 31.6 V from AS-Interface |
| Rated operating current | ? 35 mA (without sensors) / max. 230 mA |
| Surge protection | O1 ... O4: Over voltage category II UEXT, Ue: overvoltage category II, safe isolated power supplies (PELV) |
Input | |
| Number/Type | 4 inputs for 3-wire sensors (PNP), DC |
| Supply | from AS-Interface (switch position INT, default settings) or external UEXT (switch position EXT) |
| Voltage | 21 ... 31 V DC (INT) |
| Current loading capacity | ? 150 mA, overload- and short-circuit protected (INT) |
| Input current | ? 5.6 mA (max.) |
| Switching point | according to DIN EN 61131-2 (type 1) |
| Signal delay | < 1 ms (input/AS-Interface) |
Output | |
| Number/Type | 4 relay outputs, normally open |
| Supply | none |
| Nominal load | |
| Control circuit | ? 11 mA per relay (from AS-Interface) |
| Switching delay | < 10 ms (AS-Interface/contact) |
| Usage category | DC-13 and AC-14 |
| Switching | |
Galvanic isolation | |
| Input/Output | safe isolation, Rated insulation voltage252Veff |
| Input/AS-Interface | Switch position INT: None Switch setting EXT: safe isolation, rated insulation voltage 92Veff |
| Output/Output | Basic insulation, rated insulation voltage 250Veff, in phase |
| Output/AS-Interface | safe isolation, Rated insulation voltage252Veff |
Directive conformity | |
| Electromagnetic compatibility | |
| Low voltage | |
Standard conformity | |
| Galvanic isolation | EN 60664-1:2007 |
| Degree of protection | EN60529:2000 |
| Fieldbus standard | EN62026-2:2013 |
| Electrical safety | IEC61140:2009 |
| Input | EN 61131-2:2004 |
| Emitted interference | EN61000-6-4:2007 |
| AS-Interface | EN62026-2:2013 |
| Noise immunity | EN61000-6-2:2005, EN61326-1:2006, EN62026:2013 |
Programming instructions | |
| Profile | S-7.0 |
| IO code | 7 |
Описание оборудования
AS-Interface sensor/actuator module VAA-4E4A-KE5-ZEJQ/R
Под заказ
Цену уточняйте
Минск ∙
Доставка
Оплата и гарантии