Характеристики и описание
Описание оборудования | |
|---|---|
| G2 flat module 4 inputs (PNP) and 4electronic outputs | |
General specifications | |
| Slave type | A/B slave |
| AS-Interface specification | V3.0 |
| Required master specification | ? V3.0 |
| UL File Number | E223772 |
Functional safety related parameters | |
| MTTFd | 140 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
Indicators/operating means | |
| LED FAULT | error display; LED red red: communication error or address is 0 red flashing: overload of sensor power supply or outputs |
| LED PWR | AS-Interface voltage; LED green |
| LED AUX | ext. auxiliary voltage UAUX ; LED green |
| LED IN | switching state (input); 4 LED yellow |
| LED OUT | Switching state (output); 4 LED yellow |
Electrical specifications | |
| Auxiliary voltage (output) | 20 ... 30 V DC PELV |
| Rated operating voltage | 26.5 ... 31.6 V from AS-Interface |
| Rated operating current | ? 40 mA (without sensors) / max. 220 mA |
| Protection class | III |
| Surge protection | UAUX, Uin: Over voltage category III, safe isolated power supplies (PELV) |
Input | |
| Number/Type | 4 inputs for 2- or 3-wire sensors (PNP), DC option 2 inputs for 4-wire sensors (PNP), DC |
| Supply | from AS-Interface |
| Voltage | 21 ... 31 V |
| Current loading capacity | ? 180 mA (TB ? 40 °C), ? 140 mA (TB ? 60 °C), , overload and short-circuit protected |
| Input current | ? 9 mA (limited internally) |
| Switching point | according to DIN EN 61131-2 (Type 2) |
| Signal delay | < 2 ms (input/AS-Interface) |
| Signal frequency | ? 250 Hz |
Output | |
| Number/Type | 4 electronic outputs, PNP, overload and short-circuit proof |
| Supply | from external auxiliary voltage UAUX |
| Current | 0.5 A per output , 2 A total |
| Voltage | ? (UAUX - 0.5 V) |
Directive conformity | |
| Electromagnetic compatibility | |
Standard conformity | |
| Degree of protection | EN60529:2000 |
| Fieldbus standard | EN62026-2:2013 |
| Input | EN 61131-2:2007 |
| Emitted interference | EN61000-6-4:2001 |
| AS-Interface | EN62026-2:2013 |
| Noise immunity | EN61000-6-2:2001 |
Programming instructions | |
| Profile | S-7.A.7 |
| IO code | 7 |
| ID code | A |
| ID1 code | 7 |
| ID2 code | 7 |
| Data bits (function via AS-Interface) | input output |
| Parameter bits (programmable via AS-i) | function |
Ambient conditions | |
Описание оборудования
AS-Interface sensor/actuator module VBA-4E4A-G2-ZA/EA2
Под заказ
Цену уточняйте
Минск ∙
Доставка
Оплата и гарантии