Fire protection retroreflective sensor MLV12-54-2563/49/124 - фото 1 - id-p95193973

Характеристики и описание

Описание оборудования
Small fire protection photoelectric sensor
General specifications
Effective detection range	0 ... 2.1 m (with H60 reflector)
Reflector distance	0.2 ... 2.1 m
Reference target	H60 reflector
Light source	LED 645 nm
Light type	modulated visible red light
Diameter of the light spot	approx. 70 mm
Angle of divergence	1.5 °
Ambient light limit	50000 Lux
Indicators/operating means
Operation indicator	LED green, flashes in case of short-circuit
Function indicator	2 LEDs yellow, light up when light beam is free, flash when falling short of the stability control, off when light beam is interrupted
Control elements	rotary switch for light/dark
Electrical specifications
Operating voltage	10 ... 30 V DC
Ripple	max. 10 %
No-load supply current	max. 40 mA
Protection class	II, rated voltage ? 300VAC with pollution degree 1-2 according to IEC 60664-1
Output
Switching type	light/dark on switchable
Signal output	1 NPN and 1 PNP output, direct switching, short-circuit protected, reverse polarity protected, open collector
Switching voltage	max. 30 V DC
Switching current	max. 0.2 A
Voltage drop	? 2.5 V DC
Switching frequency	? 40 Hz
Response time	10 ms
Standard conformity
Standards	EN 60947-5-2 smoke insensitive up to 2 dB/m ( EN 54-12 )
Approvals and certificates
UL approval	cULus Listed, Class 2 Power Source, Type 1 enclosure
CCC approval	CCC approval / marking not required for products rated ?36 V
Approvals	VdS/DIBt certificate of compliance No. 25020
Ambient conditions
Ambient temperature	-40 ... 60 °C (-40 ... 140 °F)
Storage temperature	-40 ... 75 °C (-40 ... 167 °F)
Relative humidity	30% ... 85% non-condensing ; Non-icing
Mechanical specifications
Degree of protection	IP67
Connection	5-pin M12 x 1 connector with metal thread, 90° rotatable
Material
Mass	60 g