Technical data | EP3356-0022 |
---|
Number of inputs | 2, for 1 resistor bridge in full bridge technology |
Input connections | M12, screw type |
Protocol | EtherCAT, TwinCAT SC |
Bus interface | 2 x M8 socket, shielded, screw type |
Signal type | resistor bridge, strain gauge |
Internal resistance | > 200 kΩ (UREF), > 1 MΩ (UD) |
Resolution | 24 bit, 32 bit presentation |
Measuring error | < ±0.01="" %="" for="" the="" calculated="" load="" value="" in="" relation="" to="" the="" final="" load="" value="" with="" a="" 12="" v="" feed="" and="" 24="" mv="" bridge="" voltage="" (hence="" nominal="" strain="" gauge="" characteristic="" value="" of="" 2="" mv/v),="" self-calibration="" active,="" 50="" hz="" filter=""> |
Input filter limit frequency | 10 kHz low pass (-3 dB) |
Conversion time | 0.1…250 ms, configurable, max. 10,000 samples/s |
Conversion rate | 10,000…4 samples/s (0.1…250 ms conversion time) |
Nominal voltage | 24 V (-15 %/+20 %) |
Distributed clocks | yes |
Sensor supply | 10 V (supplied by the EP3356) |
Current consumption from US | 120 mA |
Power supply connection | feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin |
Supported nominal sensitivity | all, parameter resolution: 0.01 µV/V; recommended: 0.5…4 mV/V |
Special features | self-calibration, quadruple averager, dynamic filters, fast data sampling, parallel connection |
Operating/storage temperature | -25…+60 °C/-40…+85 °C |
Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
Protect. class/installation pos. | IP 65/66/67 (conforms to EN 60529)/variable |
Approvals | CE, UL |